We're C&L East Los Angeles Insulation, an insulation contractor based in East Los Angeles, and we fix and insulate attics, walls and crawl spaces across Commerce. The old problems come out and the gaps get sealed before any new insulation goes in.
(213) 329-0372
Commerce is mostly warehouses, rail yards and freeways, with blocks of older single-story houses tucked in between. A lot of the attics we open here still have whatever went in when the house was built, packed down to a few inches and gray with dust that drifted in through gaps at the eaves and the hatch.
The calls usually start with a hot back bedroom, a room over the garage nobody wants to sit in, or a power bill that climbs every summer. We also hear from landlords with rentals and from small business owners whose shops and offices run hot, since so much of Commerce is working buildings.
We reply within one business day, and the estimate is free with no obligation to book. I come out to your Commerce address myself, look at the attic, walls or crawl space with you and write down what the job needs and what has to come first.
(213) 329-0372Most of our Commerce work is in the attic, starting with insulation removal when the old fill is flattened, wet or full of droppings. Next comes attic air sealing, closing the gaps around can lights, pipes and the hatch, and then blown-in insulation, loose fill sent through a hose, laid evenly out to the edges. Older houses with empty wall cavities get wall insulation, and raised floors that feel cold get worked on from the crawl space. Shops and offices get the same order of work through our commercial insulation service.
In Commerce, building permits for every building and structure come from the city's Building and Safety Division, which also reviews plans and inspects the work, so if your job needs a permit, the start date waits on that step. Before anything else I check which office covers your address, and when a permit is called for, we take care of it with them before work starts. The city also requires every contractor doing business in Commerce to hold a city business license, even one based outside the city like us, and that's something you can check with the City of Commerce before you hire anyone.
Most streets here carry truck traffic from the warehouses, so we plan where our rig parks and how the hose reaches your attic hatch before the crew arrives. We're based right next door in East Los Angeles and do the same attic work on the older houses in Maywood. The price moves with how much insulation is up there now, whether old or dirty material has to come out first, how many gaps need sealing and whether foam makes sense, and the schedule turns mostly on removal and any permit. At the estimate I write down what your job needs and what has to come first.
I'm the one who climbs into your attic or crawl space at the estimate, and I write down what the job needs and what has to come first. A lead installer runs the crew on the day, and I look over the finished work with you.
New insulation over wet or dirty fill only hides the trouble, so we clear that out, seal the gaps around lights, pipes and the hatch, and keep the eave vents open so the attic can breathe. Then we fill evenly, edges included.
Plenty of attics are in better shape than the owner fears. If yours already has enough insulation and few gaps, I'll tell you so and leave it alone, because selling a job you don't need isn't how we've worked since 2017.
We're licensed and insured, and the job is backed by our satisfaction guarantee. We leave the house clean and tell you plainly what we did up there. To set up a visit, call (213) 329-0372 or send the form above.
The biggest factor is whether your old insulation can stay, because an attic that only needs sealing and a top-up costs far less than one where the old fill has to come out first. Foam costs more than loose fill, and a tight or hard-to-reach attic adds time. I'll look at yours with you and write down what it needs before you decide anything.
Most of the time goes into the prep, not the new insulation, so a simple top-up goes quickly and a job with removal and a lot of sealing runs longer. I'll tell you what to expect for your house at the estimate, once I've seen what's up there.
For air sealing and blown-in loose fill you usually don't have to leave, though you'll want kids and pets away from the hatch while the crew works. Spray foam is different, because the foam maker sets a re-entry time, the wait before anyone goes back inside, and we tell you that time before the job is booked.
Usually it's thin or missing insulation around that room, plus gaps that let hot garage and attic air straight in. An attic that's deep in the middle and thin at the edges does the same thing to corner bedrooms. Sealing those gaps first and filling the edges properly is usually the fix.
When the ductwork lives in the attic, foam is often worth the extra cost, because closed-cell foam, a dense foam that also blocks moisture, seals the air and insulates in one layer. When the ducts aren't up there, sealing the gaps and topping up with loose fill usually does the job for less. I'll tell you which one your house calls for and why.
The city checks submitted plans against the current California codes, including the Building, Residential, Mechanical and Green codes. If your insulation job needs a permit, that's the standard the work is reviewed against. For a question for the city itself, City Hall's number is (323) 722-4805.
